This Electric Energy Saving device is for use in Homes, Offices, Schools, Restaurants and small Businesses
Certification Tested to EN 61000-1:2001 EN 61000-3-2:2000+A2:2005 EN 61000-3-3:1995+A1:2001 EN 61000-6-3:2001+A11:2004
Air Con Electric Savers

Functions
1: Has the function of start-up delay protection safeguarding the compressor.
2: The Energy Saving rate is displayed on the LED.
3: Manually Operated separate from the main remote control.
4. The Unit is programmed manually and the desired running temperature inputted and SET.
5. The Unit Displays % Saving of electricity
6. Choice of working conditions and Energy Saving Ratio
7. Set Up The UP or DOWN Arrows are pressed to establish the Power Saving % required, the higher the outside temperature the lower the % should be but average 15% -25% is the normal setting recommended.

Energy Saving Principles
This controller adopts a microcomputer intelligent control system and is Independent.
It does not affect other controlling systems and does not replace the Primary Control System. It improves the run curve of the Compressor, makes the best use of redundant cooling and hot energy.
Revoves waste that is caused by capacitor overplus and establishes a minimum loss in the running system of the air-conditioning unit, and when the saver reaches optimum working condition, it also solves the frequent starting problems of the compressor unit and non-stop running faults.
There are many advantages for the controller such as simple structure, easy to use, a widely applied system, prolonging the air conditioner life. the controller can be used in homes, offices, shops, super markets, commercial applications, industrial, etc.

Technical parameters

Model: AC-10
Operating voltage 220V-250V
Rated frequency 50Hz
Power loading 735W-7.35KW
Dimensions 138*208*45mm

Range of applications

Up to (1hp-10hp Cooling only or Heating / Cooling Air conditioners and Refrigerators/Freezers


Method of connection
(1) The unit is connected to the Live + Positive feed wire between the Air conditioner indoor unit and outdoor unit, the power of the controller is connected to Positive + and Negative.

(2). The unit is connected to the Live + Positive feed wire between the Air conditioner indoor unit and outdoor unit, The power of the controller is connected to Positive + and Negative -.


DISTRIBUTORS - Please contact us should you wish to become a distributor of the Energy Savers!

Home | Illustrations | Air Con/Refrigeration Savers | Contact Us

           

 

ECOBRAND EXIM INTERNATIONAL LTD
© Copyright Ecobrand Exim International Ltd Hong Kong 2007